Antarria Dining Table Guide: Prices and Materials Compared

Name: Antarria
Address: Warehouse No. 3 28B Street - Al Quoz Ind. third - Al Quoz - Dubai, Dubai, Dubai, AE
Telephone: +971 56 118 4731
Price range: $$

Antarria's dining table collection in Dubai runs from AED 4,290 with the Dune Microcement Dining Table up to AED 15,490 with the Sora, spanning ten designs. Three of the ten, Dune, Sienna and Ethan, are microcement tables, and most of the rest carry a current discount off their listed original price.

The Range, By Real Price

Table	Now	Was
Dune Microcement Dining Table	AED 4,290	AED 4,990
Sienna Microcement Dining Table	AED 5,990	n/a
Auren Dining Table	AED 5,790	AED 9,590
Celeste Dining Table	AED 5,990	AED 7,990
Ethan Microcement Dining Table	AED 8,490	n/a
Cooper Dining Table	AED 9,490	n/a
Vela Dining Table	AED 7,990	AED 14,390
Monroe Dining Table	AED 7,990	AED 14,390
Sona Dining Table	AED 8,990	AED 17,590
Sora Dining Table	AED 15,490	n/a

How To Choose Between Them

Entry point. Dune, at AED 4,290, is the lowest-priced table in the range and the most heavily discounted in AED terms.
Microcement finish. Dune, Sienna and Ethan are the three tables built in microcement, a smooth, poured finish distinct from the timber and stone finishes used across the rest of the collection.
Top of the range. Sora, at AED 15,490, is the only table priced above AED 10,000 and currently carries no listed discount.

Several tables in this range, Auren, Vela, Sona and Monroe among them, are currently discounted well below their original listed price. Since discounts and stock can shift, confirm the current live price on the product page before budgeting, rather than relying on a fixed figure.

Matching Table Length To Seat Count

As a general rule, allow 60 to 65cm of table length per seated person on a rectangular table, plus roughly 75 to 90cm at each end if chairs are placed there too.

That puts a 6-seat layout comfortably on a table around 180cm long, and an 8-seat layout on 220 to 240cm, consistent with the spacing guidance for Antarria's own dining chair range.

A round table works differently, sized by diameter rather than length, and generally needs at least 150cm diameter to seat six without crowding, since seats are distributed around the full circumference rather than along two long sides.

Standard Height, And Why It Matters More With Mixed Pieces

75 to 76cm is the standard dining table height across most of this collection, which pairs with a 47cm dining chair seat height for the usual 25 to 30cm knee clearance.

That consistency matters most if you're mixing a table from one collection with chairs bought separately, confirming the exact tabletop height on the product page avoids a mismatch that only becomes obvious once both pieces are in the room.

Caring For A Microcement Table

Dune, Sienna and Ethan share the same microcement construction: a durable finish hand-applied over a stable core, with a smooth, matte surface. Wipe it down regularly with a soft, damp cloth or sponge, dab spills immediately rather than letting them sit, and always use a coaster or trivet under hot dishes rather than placing them directly on the surface.

As microcement is a hand-applied, artisanal material, some variation in tone and texture between individual tables is normal, each one is genuinely one of a kind.

Choosing A Shape For The Room

A rectangular table generally suits a longer, narrower dining room and makes better use of wall space if the room doubles as a walkway. A round or oval table needs more floor space relative to how many it seats but works better in a squarer room, since there's no corner of the table jutting toward traffic.

If the dining area sits open to a living or kitchen space rather than in its own room, a round table also tends to feel less like a barrier dividing the space than a large rectangular one does.