Dining Chairs in Dubai: The Complete Buying Guide

Name: Antarria
Address: Warehouse No. 3 28B Street - Al Quoz Ind. third - Al Quoz - Dubai, Dubai, Dubai, AE
Telephone: +971 56 118 4731
Price range: $$

Our dining chair collection runs to 14 designs from AED 1,690 to AED 3,990. Most sit at a 47cm seat height, which pairs with a standard 75 to 76cm table, and the range splits mainly between solid hardwood frames and handcrafted metal frames.

Here's the full range and how to choose.

The Range

Chair	From	Frame
Luca	AED 1,690	Hardwood, 47cm seat
Nero	AED 1,890	Hardwood
Zinnia	AED 1,990	Metal, 47cm seat
Nola	AED 1,990	Hardwood, 47cm seat
Hampton	AED 1,990	Hardwood
Ezra	AED 2,190	Hardwood, 42cm seat
Cillian, Miro	AED 2,390-2,490	Hardwood
Elio	AED 2,690	Hardwood
Fai	AED 2,890	Hardwood, 47cm seat
Noto, Cael, Ari	AED 2,990	Metal

The Range How To Choose

Check your table height first. A 47cm seat needs a 72 to 77cm table for the correct 25 to 30cm clearance. Ezra's 42cm seat suits a slightly lower table.

Hardwood for a warmer, more traditional room. Ten of the fourteen designs use a solid hardwood frame.
Metal for a leaner, more contemporary look. Noto, Cael and Ari all use a handcrafted metal frame at the same AED 2,990 price point, and Zinnia is metal-framed too, at AED 1,990.
Noah, if you want an armchair at the head of the table. It's built wider than the rest of the range, at 72cm, for exactly that role.

Not every model publishes a seat height on its product page. Where it's missing, ask before ordering, especially if you're mixing chairs from more than one design around a single table.

How Much Space To Leave Per Chair

As a general rule, allow 60 to 65cm of table width per seated person so chairs don't collide with each other or the elbows of the person next to them.

For a table with chairs on both long sides plus one at each end, that means a 180cm table comfortably seats six along the sides (three per side) with an end chair at each side, while a 220 to 240cm table is where an eight-seat layout starts to feel properly spaced rather than tight.

Beyond the table itself, leave at least 75 to 90cm behind each chair so someone can push back and stand without hitting a wall or a sideboard.

Quick Reference: Matching Seat Height To Table Height

Seat height	Matching table height	Chairs in this range
42cm	67 to 72cm	Ezra
47cm	72 to 77cm	Luca, Zinnia, Nola, Fai

The 25 to 30cm clearance between seat and tabletop is the figure that actually matters, not the absolute numbers on either side of it. A 47cm chair under a 70cm table leaves only 23cm, tight enough that taller guests will notice their knees. Confirming the exact tabletop height on the dining table's own product page before ordering chairs avoids that mismatch.

Caring For Hardwood Versus Metal Frames

Ten of the fourteen designs use a solid hardwood frame, handcrafted with reinforced, corner-blocked joinery in the same construction style used across Antarria's seating. Wipe hardwood frames down with a soft, dry cloth regularly, and use a cloth only lightly dampened with water for marks, avoiding solvents or abrasive cleaners that can dull the finish.

The metal-framed designs, Zinnia, Noto, Cael and Ari, hold up better against daily wear and spills since there's no painted or stained wood surface to protect, though a soft dry cloth is still enough to keep the frame free of fingerprints and dust. On any upholstered seat pad across the range, dab spills immediately with a soft white cloth dampened with water rather than letting them sit.

Mixing Chair Designs Around One Table

Pairing two different designs, for instance side chairs in one style with Noah as a wider armchair at each head of the table, works visually as long as the seat heights match.

Mixing hardwood and metal frames around the same table is a legitimate look rather than a mismatch, provided the finish tones sit in the same general palette, since a warm hardwood and a cool-toned metal in the same sightline can read as accidental rather than intentional if the rest of the room doesn't tie them together.